Fillable Magnum Rounds
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fillable Magnum Rounds, designed for filling with 5mm steelballs
- Rating
- 4 / 5
- Likes
- 5
- Downloads
- 57
- Makes
- 1
- Views
- 445
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello all,
to give this and all other revolver replicas a little more weight, I have redesigned the cartridges and provided them with a screwable head.
The XL version is a little larger, holds 21 steel balls and brings 8.3g on the scale, so that then with a complete loading of the revolver the weight increase is 49.8g.
The normal version is just as large as the already enclosed with the model, but I have not managed here to adjust the head that the free space between the balls and the head disappears. So you hear it click when cartridge is moved.
Therefore, either add something or alternatively use sand.
Settings for Printing:
Layer thickness: 2mm
Layer width: 0.4mm
Filling: 30%
Depending on the material used, you can also go lower or higher with the filling, the printing times change only marginally between 20% & 80%.
Have fun printing