Retro Boomerang with Wide Wings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a variation of my very first boomerang design dating back all the way to 2011.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 315
- Makes
- 3
- Views
- 767
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This is a variation of my very first boomerang design dating back all the way to 2011.
I made the wings a little wider, added slots to slow down rotation towards the end of the flight, and added an optional center hole for easy one-finger catches.
Print instructions
Rafts: No
Supports: No
Resolution: 0.2
Infill: 10-30%
Filament: Material4Print PLA Blue
Notes:
Make sure your print lays flat on a table when you pop it off the build plate. Mine usually warp downwards a little, which needs to be corrected. To fix that issue, I warm up my print slightly (on the build plate, over a toaster, or with a hairdryer), and clamp it to a flat surface with the wingtips slightly elevated on top of coins or small washers.