Green from Rainbow Friends
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is Green from Rainbow Friends. He is assembled with 3 pieces
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 562
- Makes
- 3
- Views
- 2,036
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
updated 1/15/2023. I had initially made them threaded as I thought my kids would break the arms and then I'd just unscrew and reprint. Which they have, but I tried to make the thread tolerance bigger and it just became a pain to try and fit. So I've updated them to not have any threads. Add a little glue in the arm fittings.
-----------------------------------------------------------------------------------------------
This is Green from Rainbow Friends. I made his eyes a little more “googly” than the first one I printed in the pictures. You can see them in the screen shot of my slicer. He consists of 3 pieces. Push the longer arm with the female end in first, and pushed it close to the edge of the other hole. Then add a little glue and push in the other arm.
If you print the arms laying down, I used small tree supports. No supports needed if slicing with arms standing up like the slicer picture. I printed the body with and without supports. Both are doable, but the print underneath looks a little better with the tree supports. I used 15% infill, .16mm height.
I included the stl files for each piece and the painted bambu studio 3mf file.
Enjoy and don't get OOFED!