Tuna Can Ashtray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print is designed to accommodate 22mm cigars comfortably. The tuna can I used for this was a Starkist 12oz can.…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 268
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This print is designed to accommodate 22mm cigars comfortably.
The tuna can I used for this was a Starkist 12oz can. It has a bottom diameter of approximately 99.7mm with a height of 52.1mm.
I printed it out of ABS because it's meant to stay out doors in the heat. If you live in a milder climate, or it's going to stay indoors, you can print it out of PLA but be aware that you don't want the hot end of the cigar getting too close to the PLA as it will probably warp it.
I'm still working on my print settings for ABS hence the visible imperfections. I painted the tuna can with a high temp black paint.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Infill:
20%
Filament:
Kodak ABSBlack
Category: Other