1 / 4
Heewing T-1 Ranger Camera Mount - Insta360 Go2 / Caddx Peanut
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount your Insta360 Go 2 and/or Caddx Peanut on the T1 Ranger.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 0
- Views
- 780
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
Glue on with a strong glue like E6000 in place of the stock front and rear vents. You'll need an M4 bolt and nut for the mount.
The Insta360 Go 2 mount is pretty tight. May be worth slightly upscaling it. Peanut mount is pretty good…but if you are feeling clever it, and the front scoop mount, could be mirrored before printing. That way the USB adapter would connect without having to remove it from the mount. I already put a hole for the ship power connector on the wrong side so I'm too lazy to fix it.
Mounts work great: