1 / 5
Voron2.4, Voron Trident Fysetc Metal Gantry Clamp — image 1
1 / 5

Voron2.4, Voron Trident Fysetc Metal Gantry Clamp

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A part to hold the M5 nut for the gantry bolt so it can clamp to the metal gantry extrusion.

Rating
0 / 5
Likes
22
Downloads
126
Makes
1
Views
1,374
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

A part to hold the M5 nut for the gantry bolt so it can clamp to the metal gantry extrusion.

Assemble steps:
1. Add 3 M5 nuts to 3 holes in the model

2. Slide the cube inside the hollow extrusion

3. Slide the bolt in (You will need to use M5x16 and M5x18 for the top, and M5x30 for the bottom). Be patient, after the bolt is the whole way in, keep turning until tightened. 

Tags