Configurable Spice Rack
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€9.43 – €11.53 net (excluding VAT)
For file: spice rack_0.3mm_PLA_MK3S_8h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €10.48 excluding VAT (range midpoint).
- Weight reported by the author
- 166 g
- Print time reported by the author
- 8.81 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
See all the spices in your cabinet
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 147
- Makes
- 3
- Views
- 921
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Our entire spice collection was single layer of jars. Looking around I could not find a solution STL so I went back to the drawing CAD. This spice rack allows you to change the shelf depth, shelf height, lip height and model thickness. Open the model in FreeCAD, call up the spread sheet and modify shelfHeight shelfDepth lipHeight and rackThickness. The cell rackWidth allows you widen the model, but be careful you are limited by your printer's Z axis for the model is printed on its right side. The side with the stabilizer, see the 3mf file.
The shelf height allows you to adjust the rack's overall height so the rack's top shelf will fit the spice jars.
No need for supports. I set the Repetier speed to 109% and got the print done in 8 hours. I had no problem with the back panel bridging on my MK3S, it came out perfect to my surprise. I used SUNLU PLA+.
After a few months in service the rack started sagging on the unsupported side. I have revised all the files to add a glue on support, Enjoy!
As new versions of FreeCAD were released some of my sloppiness in the CAD file caused problems. I uploaded a SpiceRack Clean up.FCStd file to fix scaling issues.