1 / 9
Flower Pot - Pyramidal shards
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A new serie about plant or flower pots, "Shards". This is the first one, this time with pyramidal shards.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 75
- Makes
- 0
- Views
- 370
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are 3 versions, one with sharp edges and one with rounded edges (to protect the plants or the fingers). The third is an in-between.
The walls are thin ( 2.8mm) to reduce the use of material, I recommend to make 100% concentric infill . The bottom is 2.2mm thick. It's best to use 0.2mm layers but 0.3 work nice.
- /!\ Your profile needs to be finely tuned, the pot will leak if the seam is not well merged. I my case, I simply removed the seam with a random start layer /!\
The hole is 101mm wide, for a 10cm pot (maximum width is 123 mm). To have a 12cm hole, scale up the model to 120%.