1 / 7
DIY Rotary for Laserangravers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIY Rotary for Laserangravers. Works fine for me.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 75
- Makes
- 0
- Views
- 615
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I didn't want to spend so much money on a Rotary, so I drew one myself without further ado.
Works so far quite well.
Needed are:
1x 40mm stepper motor
4x 8mm rods
8mm rubber bands/seals
3mm thread inserts
2x 20 tooth 8mm timing wheel
1x 20 tooth 6mm Timing Wheel
1x 3mm pulley
1x 260mm belt