Caravans & Motorhomes Hook-Up Lead adapter rain shield.
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.57 – €0.70 net (excluding VAT)
For file: Cable Guard v2_47m_0.20mm_190C_PLA_ENDER3PRO.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.64 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 46.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Caravans & Motorhomes Hook-Up Lead adapter rain shield designed to prevent water ingress.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 234
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Simple Caravans & Motorhomes Hook-Up Lead adapter rain shield. Ours is connected to an outside socket, so hangs down, and in bad weather can fill with water (despite the factory rubber seal) and trip out the electrics. This modification helps prevent the water ingress.
This version has an opening for an 8mm cable. The cable must be removed from the 13A plug and thread through the shield and sealed with self amalgamating tape then the 13A plug reattached.
Can be printed without supports - must be large-side down flat on the build plate - best with a 6mm outer brim to aid bed adhesion.
If printed in PLA it will need a coat of paint to protect from sunlight.
