1 / 1
Not your Grandfather's "shapes and pins" puzzle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This classic puzzle-piece has a little twist. All 16 pieces have different shape and hole-count combination :)
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 31
- Makes
- 0
- Views
- 253
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Share Alike
This classic puzzle has a little twist. All 16 pieces have different shape and hole-count combination :)
You can print two sets: a "classic" one and a “trick” version.
- In the classic version all round pieces have one pinhole, or all triangles have 3 pinholes, etc…
- In the trick version there are 16 different versions with all four shapes and all four pin combinations.
I added the base as a cutout DXF template. You can just cut it out from plywood manually, or use a laser-cutter if you have one. You can use simple 10 mm dowels as the pins.
Try to print both sets and swap out the puzzle-pieces after your little ones got used to the standard set! :)