1 / 5
Nema23 motor mounts and XZ axes for 2020 extrusion 3D printer — image 1
1 / 5

Nema23 motor mounts and XZ axes for 2020 extrusion 3D printer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Nema23 motor mounts and XZ axes for 2020 extrusion 3D printer

Rating
0 / 5
Likes
9
Downloads
46
Makes
0
Views
503
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

These are just some parts I created for a high-speed Cartesian 3D printer project I'm working on and are mostly just a way for me to teach myself FreeCAD.

The parts are loosely based on this design...

https://www.thingiverse.com/thing:3082931

but built from scratch in FreeCAD.


The X_Motor_Mount to X rail, Z_Carriage to X rail, X_Idler_Carrier to X rail, and Z_Nut_Carrier to Z_Carriage mount all use M6x12 screws tapped into the plastic pieces.

The holes in the Z_Carriage for the Z_Nut_Carrier mount are tapped, but not the holes in the Z_Nut_Carrier itself.

The X_Idler_Carrier idler is a 20T GT2 pulley with a 5mm bore, using a M5x30 (could be a M5x20, I just used what I had) tapped into the bottom hole.

The Nema23_Y_Motor_Mount_V2 and Y-Idler_Mount are mounted to the extrusion using M5x10 screws with hammer nuts.

The Y-Idler_Mount pulley holes are sized for an M3x20 screw.

The Z_Carriage wheels are standard 15.3mm mini V-wheels using standard 6mm spacers in front and eccentric spacers on the rear. All mounted with M5x30 screws.

You can use the Y_Motor_Mount_V2 for an extruder motor mount as well by adding the 15mm_Nema23-Nema17_Extruder_Plate. M5x25 screws secure motor to plate through motor mount (thread into plate). Attach Nema17 extruder gearing to plate with M3x10 screws threaded into plate.

I just thought I would post these up in case someone else wants to use them.

Tags