1 / 5
Skateboard Shelf Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Too old and fat but don't want to get rid of your old board? Make it a shelf!
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 67
- Makes
- 2
- Views
- 658
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Remove the wheels on one side & put the axles through the block and use the nut and 5/16” washers to keep it tight and make sure it’s flush with the end of the axle. Don’t over tighten it because it’s a 3D printed part. 1-2 Ugga Duggas should be plenty tight.
It holds a few pounds well enough but don’t put your kids on it. I made it to go into wood so if you decide to put it into drywall, pick your anchors well and use washers in the provided recesses. I would avoid anything with a tapered head.
Category: Decor