1 / 2
Yeti Rambler 14oz TPU Sleeve / Bottom
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
No coaster needed, TPU bottom for 14oz Yeti Rambler.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 56
- Makes
- 1
- Views
- 460
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I printed this with Amazon basics TPU.
https://www.amazon.ca/gp/product/B07H9KNPNL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Printed with supports everywhere (even though they are a pain to get off)
This STL will need supports for the handle opening, and the curve on the bottom.
I printed with a 0.6 nozzle and a standard generic FLEX profile, with slightly modified temperature settings, supports everywhere and had 15% infill set even though it is too thin to require infill. (didn't actually check the slicer to see if it used infill anywhere)