Circular fillet for ceiling light
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.79 – €0.97 net (excluding VAT)
For file: PETG_white_Jims AMENDED light ring_0.2mm_PETG_MINI_55m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.88 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 55.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple gap filler between hole in ceiling plasterboard and new recessed light fitting.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 274
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
My friend was replacing the recessed downlights in his kitchen with new LED fixings. Unfortunately, the new fixings were slightly smaller than the existing ones and he asked me if I could produce something to fill the gap. I came up with a simple design using Tinkercad. It fitted the existed hole in the ceiling and (thankfully) still enabled the spring fixing of the new light fitting to extend across the 3d printed part and provide secure fixing to the ceiling plasterboard.
Printed in PETG for the increased heat benefit.
I printed a total of 8 of these for him once I had established the correct size for the purpose.