1 / 2
2020 Aluminum Extrusion Drill Guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A guide for drilling holes in 2020 aluminum extrusion
- Rating
- 5 / 5
- Likes
- 75
- Downloads
- 367
- Makes
- 3
- Views
- 2,651
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a guide for drilling holes in 2020 aluminum extrusion. It has holes at 10mm intervals from 10mm to 100mm.
It is useful primarily as a layout and marking tool, obviously PETG is not going to keep a steel drill bit from wandering.
There are three sets of hole guides:
- 4mm - for a center punch to mark for holes
- 6mm - for drilling holes for M6 screws
- 11mm - for drilling holes to counter sink the heads of socket head M6 screws