1 / 1
Thermal Paste/Epoxy/Glue Spatula
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Great for mixing and spreading paste like adhesives, epoxy, glue, etc.
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 456
- Makes
- 11
- Views
- 1,292
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Liked the size and shape of the original design. However the edge was too thin for mixing/spreading epoxy. The edge is now ~1mm thick.
If you like to scale it to increase size, keep the overall height at 3mm to maintain the edge of the spatula ~1mm thick. You may also reduce the edge thickness by reducing the overall height (i.e. 2.5mm).
For example, using PrusaSlicer, while the scale factor is locked (closed padlock), increase the overall size as required. Then, click the padlock to allow non-proportional scaling and set the height to 3mm.
