Locking swivel adapter for Monsterech chair mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Locking swivel adapter for Monstertech Chair swivel mounts (original)
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 310
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- GNU General Public License v2.0
Locking swivel adapter for Monstertech Chair swivel mounts
Required parts
You will need to have already purchased the swivel adapter set to get the thrust bearings, four arm threaded stub knob, and adjustable threaded handle.
You will need a tension spring, four arm threaded stub knob, and the thrust bearing. You'll need a spring and thrust bearing per swivel mount.
Buy the cheapest metal 4.5mm aka .177 Caliber BB balls you can find. Plastic ones might work, but may wear down and cause the swivel mount to "stick".
Print and Assembly
- Print (ABS or PLA is fine) the 4080_adapter.stl, and use pliers to install the BBs into the underside of the piece.
- Place 4080_adapter.stl onto the end of the 4080 aluminum extrusion, little tabs going into the aluminum.
- Print the mount_left.stl and mount_right.stl, I used nylon for wear resistance, and bacuse it's slippy -- mount it with the raised edge facing down on the aluminum bracket bolted to your chair, the parts should line up pretty much exactly with the shape of the bracket.
- Place the thrust bearing on the four arm threaded stub knob first, followed by the tension spring. Place the aluminum extrusion on top, now comes the hard part -- the spring is difficult to compress, so you'll need to push up while rotating the knob, so the threads catch. This doesn't have to besuper tight, just enough to compress the spring some.
- Screw the adjustable threaded handle into the bottom of the aluminum extrusion, make sure everything fits snug, then back off the adjustable threaded handle so you can swivel the mount.
Now try rotating your swivel mount. You should feel some resistance, followed by it popping into place in the holes in the nylon piece. Try spinning around in your chair, moving forward and backward, the swivel mount should stay locked in position and not flap around wildly.
Game on. Enjoy.
Category: Video Games