1 / 4
Eufy Video Doorbell 2E (Battery) 45 Degree Wedge — image 1
1 / 4

Eufy Video Doorbell 2E (Battery) 45 Degree Wedge

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

In Eufy's pantheon of 2K video doorbells, model 2E, is the less common variant with a smaller chassis.

Rating
5 / 5
Likes
6
Downloads
92
Makes
1
Views
1,063
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

Cheers to Bootjevaarder's original design which I remixed to fit the smaller chassis of the Eufy Video Doorbell 2E (Battery). The screw holes (on center) are about 12mm closer together in this remix and the wedge is about 3-4 mm thinner.

Print in PLA or ABS at your filament/printer specs. Recommending a black filament to match the color of the Eufy dock; 20% infill is plenty sturdy. Here in the States, I used a #6, 5/8 inch wood screw (metric 15.5mm long by 3.5mm thread) to secure the wedge to the Eufy-provided dock. 

As best as I can tell, this 2K doorbell featured a mostly white chassis, but the camera assemble atop is glossy black. Here's an Amazon link for reference: https://www.amazon.com/eufy-Resolution-Hardwired-Installation-Supported/dp/B0BBQV57VG