1 / 1
Sovol SV06 improved homing base buckle belt attachment
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New belt attachment for the bed of the Sovol SV06 to align the homing limit with the belt path.
- Rating
- 0 / 5
- Likes
- 35
- Downloads
- 141
- Makes
- 1
- Views
- 1,619
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The Sovol SV06 homes by running into the end stops and detecting the stepper stalling. For the bed the stop is a one linear bearing block which is offset from the center and would pull the bed to one side each time. To reduce the stresses on the bed I modified the belt attachment to touch first which aligns the touch point with the belt and avoids this.
My bed is insulated and I printed in Prusament PETG, no issues so far. If your bed is not insulated, check the temperatures there first.