MK3S Side Tray Remix
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.51 – €0.62 net (excluding VAT)
For file: mk3s_sidetray_divider-v2-1_02mm_petg_mk3s_33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.57 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 33 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a remix of the great print by Jarek.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 132
- Makes
- 0
- Views
- 1,341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the great print by Jarek.
When I installed a new LCD cover and brackets on my MK3S (https://www.prusaprinters.org/prints/27937), the side trays would no longer fit (the left side hit the SD card) and they stuck out farther than the LCD did. And while the attachment clips on the original make removing the tray easy, I didn't have much luck with them. And with my MK3S riding on isolator feet (https://www.thingiverse.com/thing:3496474), I now had extra space below the tray I could take advantage of.
So I've used Jarek's design as inspiration to redesign the trays using a shorter overall length and 5mm extra depth. In addition, these now attach to the extrusions using M3 bolts and T-nuts.
STL files:
- "v1" files - standard redesigned trays.
- "v2" files - added raised slots in the sides to allow use of removable dividers.
Each tray requires two T-nuts and 2 M3-12 or M3-14 bolts (depending on the style of T-nuts you use)
(2020-07-28)
Other notes/options:
- If there's room between the bottom of the tray and the surface, you can try adding adhesive rubber feet to help support the tray
- To keep any tools or items in the tray from vibrating and causing extra noise, try felt or foam/rubber tray liners to the bottom of the tray
(2022-03-10)
Want a slide-in holder for Revo nozzles that work with the v2 side trays with divider slots? Look here: Revo Nozzle holder for side tray by BirdmanRS
Print instructions
My test prints during design were with PLA, but my final prints shown here are PETG to better withstand any extra heat should the printer be in an enclosure.
Trays:
- Filament: Prusament PETG Jet Black
- Layer Height 0.2
- Infill: 15%
Dividers:
- Filament: Prusament PETG Carmine Red
- Layer Height 0.2
- Infill 15%
Sample gcodes:
- v2 sample gcodes are on the Files tab.
- v1 sample gcodes are on the User Print Files tab.