1 / 4
Radiator legs for Alphacool radiators
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Legs for placing PC watercooling radiators on an even surface, like a table.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 48
- Makes
- 0
- Views
- 931
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The files here are for 140mm Alphacool radiators (tested with the NexXxos XT45), but at least the single legs should work for any 140mm radiator.
The OpenSCAD files are on github, and can be easily adjusted to other hole distances or be made longer: https://github.com/bwachter/alphacool_radiator_legs
The files here are for 40mm high legs, to be mounted with M3x30 screws. For other screw length or leg height generate your own STLs.
0.3mm layer height draft prints work fine for this.