1 / 1
Lithopane Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Lithopane Box with a seperate roof
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 63
- Makes
- 0
- Views
- 570
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A lithopane box with a seperate roof. The lithopanes can be a tight fit but when they do fit, they fit. The measurements for the lithopanes should be 120mm long, between 79.9mm & 82mm high and 3mm thick.
The lights which I used are these
( https://www.amazon.de/dp/B08GKKN248?psc=1&ref=ppx_yo2ov_dt_b_product_details )
Printed in PLA, wouldn't go below 15% infill, speed should stay around 50mm/s so the towers can print well.