1 / 5
PWM controler housing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Housing for a PWM controller 12V 2.0A
- Rating
- 5 / 5
- Likes
- 59
- Downloads
- 323
- Makes
- 6
- Views
- 1,265
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This housing is made for a PWM controller 12V 2.0A (max), sold here:
www.banggood.com/Low-Voltage-DC-1_8V-3V-5V-6V-12V-2A-Motor-Speed-Controller-PWM-1803B-p-961010.html
Attachment using 2 screws or double sided tape.
Assembly instructions:
- If you want attach it using screws, mount it first!
- Slide the controller in and secure it with the nut from outside.
- Click the lid in place (beware to right orienation)
- Put the knob on the contoller
- Attach wires to the controler
Print settings:
- 0.2mm layer height
- 2-3 perimeters
- no supports
- ideally PETG
[DONATIONS]
If you find this thing good and useful, consider supporting my work by sending a tip.