1 / 5
Headphone Hanger - Inside Facing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple headphone hager that mounts to a desk (up to 3 cm thick) and faces towards the inside of the desk.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 1
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
Print Settings: (I use a Flashforge adverturer 3 pro)
Main Body: 2hrs print
- Layer height: 0.18mm
- Print speed: 40 mm/s, travel speed: 70mm/s
- Shell count: 2
- NO RAFT, NO SUPPORTS, brim is optional
- 15% infill
Screw: 40 mins print
- Layer height: 0.12mm
- Print sped: 40mm/s, travel speed: 70mm/s
- 10% infill
- Use a brim for better bed sticking
- NO RAFT, NO SUPPORTS
Thread Insert: 15 mins print, Same settings as Screw
Screw Cap (Optional): 20 mins print, Same settings as Screw
Assembly:
- Insert the thread insert part into the main body using the grooves
- Insert the screw through the thread and the main body
- Once the screw is partly through the other end, insert the screw cap
- Mount the body to your desk and tighten the screw to fasten it (see photos)