1 / 3
Metcal PCT-100 Cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is useful if you leave your PCT-100 on your desk all the time and worry about something getting into the nozzle…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is useful if you leave your PCT-100 on your desk all the time and worry about something getting into the nozzle of the PCT-100.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.25mm
Infill:
20%
Filament: Polymaker PA6-CF Black
Notes:
Please try to get some PA6-CF or similar material with at least 200C heat resistance, since if you accidentally turned on the preheater and left the cap on, normal material such as PLA PETG ABS will melt down.
The thermal image shows the plastic top will get around 92C if the temperature on the preheater is set to #6. The bottom of the plastic cap will defiantly get around 180C on the #6 setting.Category: Electronics