1 / 2
PCB milling board fixer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fixation of thin sheets on a milling machine using an M6*30 hex screw.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 41
- Makes
- 0
- Views
- 353
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
- No supports required.
- Any layer height (0.1 mm preferred).
The insert nuts I used were 18mm tall, so I used M6*30mm screws. Use different screw length if needed.