1 / 5
Kitchen Sink Sponge Holder - Right  Holder - in all sizes (for all sinks and sponges) — image 1
1 / 5

Kitchen Sink Sponge Holder - Right Holder - in all sizes (for all sinks and sponges)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sponge holder to hang in the middle of your kitchen sink that holds the sponge on the right side, for all sizes.

Rating
5 / 5
Likes
17
Downloads
213
Makes
2
Views
759
Reviews
2

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Share Alike

This is a parameterized sponge holder that hangs on the center separator of your sink and holds a sponge to right. If you need to the left or double I also produced those:

It's parameterized so I generated many different sizes so you can match your own sink and sponges:

  • Sink: this is the width of the center divided in your kitchen sink.
  • Sponge: this is the width of your sponge when standing on its side.

With those two sizes search through the STLs to find the appropriate one. The sink center width should be pretty much an exact size, so I produced every millimeter between 15mm and 60mm. It needs to fit snug, friction fit, so that it doesn't move. The sponge needs to fit loosely, so I produced it every 5mm between 20mm and 60mm. Measure your sponge and go to the next bigger one. If you need other sizes, let me know and I'll produce them.

When printing, I found bed adhesion to be a problem due to lack of surface area, so I had to add a brim to print it successfully:

I have also uploaded the Autodesk Inventor ipt file in case you want to modify it. 

Tags