Lid Sliced
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.55 – €0.67 net (excluding VAT)
For file: Pill Container Lid_0.2mm_PLA_MK3S_44m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.61 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 44.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Used the object file and put it into prusa slicer adding a 2mm brim to print
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 32
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
I had a bit of issue printing from the object after looking at the timeslice. The top of the lid does a bit more movement than just using the limited contact with the bed. I resliced adding a 2mm brim and the printer had no issues printing PLA from both Overture and Flashforge. The yellow is from Flashforge and the purple is from Overture.