Ryobi P3105 Solder Holder (Now with tip holder)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds small roll of solder and/or solder tip
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 107
- Makes
- 0
- Views
- 644
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Small roll solder holder. Designed to fit my roll of solder that has a 25mm hole diameter by 20mm thick. Outer roll diameter is 55mm. Screws should form their way into the plastic for a tight fit.
Assembly: Screw both sides together and run a 4mm or 5/32 drill bit through hole to clean it out before putting it on the soldering iron.
Parts:
- 4mm or 5/32 drill bit
- (2) 3mm x 10mm screws
Designed on TinkerCad
PLA 3D-Fuel Lulzbot Green
Printed on Ender 3
Ender glass plate
Temp. 65 bed, 200 nozzle
0.4 nozzle, 0.2 layer
20% infill
5/2/2023 Remixed to add a solder tip holder. I bought the tips from EBay for about $5.00. 5PCS SET Solder Screwdriver Iron Tip 900M-T for Hakko Soldering Station Tool. They are not Ryobi but they fit. Make sure you use the small sleeve from the Ryobi tip in the new tip. The tips vary slightly in size so some slip in the holder and others have a snug fit.