Prusa Mini & Mini+ USB-Plug and Power Switch Frontplates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are new front plates to extend the Prusa Mini & Mini+ power switch and USB-plug.
- Rating
- 5 / 5
- Likes
- 271
- Downloads
- 753
- Makes
- 22
- Views
- 6,304
- Reviews
- 21
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
These are new front plates to extend the Prusa Mini & Mini+ power switch and USB-plug.
I mainly made this to place the Prusa Mini into my in height modified Ikea Kallax, like seen in the picture. It fits perfectly with only 6mm of space.
You need to extend the 24V power plug with around 1,5mm2 /16AWG cables and new 4,8mm connectors (can be found in any hardware store).
Also you need an 25cm / 10inch USB extension cable with 90deg right angle which can be easily found on Amazon:
https://www.amazon.de/gp/product/B01K48IRXO/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
And also 2x M3 countersunk screw with a length of 8-20mm, that's it.
Print instructions
I printed both parts in Prusament PETG and 0,20mm layer height. Due to the limitations of the original Prusa Mini extruder and hotend it was not able to print it in 0,10mm or 0,15mm layer height (to many retractions and failed prints).
If availible use the powder coated sheet for better looks.