Thank You Card
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.01 – €3.68 net (excluding VAT)
For file: 4J-ThankYouNOPocket_0.2mm_PLA_MINI_3h40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.34 excluding VAT (range midpoint).
- Weight reported by the author
- 35 g
- Print time reported by the author
- 3.67 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
It’s important to express appreciation for your birthday gifts. Here is a unique card to do so.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 215
- Makes
- 0
- Views
- 1,235
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Public Domain
This card is similar to others I have published, except it is a Thank You note.
A single, vertical print is used to print the card with the hinge. The hinge works nicely.
It will likely be unique to the recipient.
The hinge needs to be printed vertically, which does not support multiple colors, although messages may be embossed at 1.5 mm height.
You can add the text with a felt tip pen or make something fancier on paper with PowerPoint or another drawing package and glue it to the card. I have used standard paper. Maybe should use heavy paper in the future to eliminate wrinkles.
You can also make a thin (0.8 mm) rectangular print with a message that can be printed with multiple colors easily with a Prusar slicer, then pasted on the inside and/or cover. Sample shown in the brown card.
I had difficulty adding paint to embossed letters. It / I was sloppy.
I also tried using a felt tip pen on this card's embossed “Thank You”, as shown in a photo. The ink spread down the embossed lettering to the card's surface by capillary action. That was a surprise. Any suggestions?