AlmostVintage: A way to prettier storage
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.27 – €2.78 net (excluding VAT)
For file: rod_015mm_pla_mk3s_2h50m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.53 excluding VAT (range midpoint).
- Weight reported by the author
- 28 g
- Print time reported by the author
- 2.7 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Prettier than the raw box. Enables almost girlfriend-approved storage boxes based on Prusament filament cardboard boxes.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 29
- Makes
- 0
- Views
- 1,102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
Prettier than the raw box. Enables almost girlfriend-approved storage boxes based on Prusament filament cardboard boxes.
Print instructions
Spray paint is optional, but advised. It does a lot for the look. The model should be thought of as just providing the shape.
I have uploaded the OpenSCAD file as well for costum editing.
Works on both boxes with round and hexagonal holes.
Instructions
Remove sticker from box
Spray paint in desired color
Wait for everything to dry
Place the printed tag over the hole in the box, and use a sharp tool to make holes in the cardboard through the printed model.
Optional, but advised: add a bit of glue on the backside of the printed tag.
Push pins/rods through holes and cardboard to fix the tag to the box. All three must go all the way through, with the small bump protruding through the cardboard.
Wait for glue to dry.
Figure out a place to put your new storage box.