Filament Spool Transfer Device
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.58 – €5.60 net (excluding VAT)
For file: All GCodes for standard parts (does not include "For 70mm spools" parts) / spooling-device-parts_04n_02mm_petg_mk4_5h9m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.09 excluding VAT (range midpoint).
- Weight reported by the author
- 67 g
- Print time reported by the author
- 5.15 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Created a device to re-spool filament from one to another with minimal human interaction
- Rating
- 5 / 5
- Likes
- 293
- Downloads
- 1,624
- Makes
- 6
- Views
- 17,099
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A brief video deomonstration:
https://youtube.com/shorts/kiZKUkexKrg?si=kBOF8F9uXhrnBcDT
Inspired by the struggles of some printers to use cardboard spools, this device will ensure level winding of filament onto a new plastic spool.
Run with a 3/8" socket adapter. If you want to drive it using something else, there are 4 M3 screws in a 50mm square on the drive gear.
UPDATE 2023/01/23 : Added in the 50 tooth gear I forgot to upload.
Non-printed parts required:
5x 608 bearings (I used 608ZZ, but 2RS would work too)
8x M3 x 4 x 5 Heatset Inserts
2x 6x3 Neodidymium magnets
3x M3 nuts
Assorted M3 Hardware (Ranges from M3x12-M3x40, will update this soon)
Some Glue
Optional, but useful is a piece of PTFE tube (bowden tube sized, 4x2mm)
When gluing the diamond shaft together, use two of the bearings to ensure correct positioning.
Assembly Instructions: https://docs.google.com/document/d/17WcXDU7UAVl6RjmVkTb7mQGC5FVSP0qnfMd-afVyT7w/edit?usp=sharing
No supports Required
Printed with 4 perimeters, 40% infill, 5 top and bottom layers, and no supports.