1 / 34
Logitech G433 Pivot Point Replacement Part for broken Headsets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My Logitech G433 was broken on both Pivot Points, but i can't find Spareparts for the G433 :-(.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 542
- Makes
- 3
- Views
- 3,483
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
My Logitech G433 was broken on both Pivot Points, but i can't find Spareparts for the G433 :-(.
Here are my printable Spare Part's ;-)
You need:
- print all four Parts (two Left, two Right).
- 8 M3x8 Screws
- 8 M3 Nuts
- T5 Torx Screwdriver
- small Phillips screwdriver
- Allen key for the M3 screws
- a plastic Opening Picks (optional)
- soldering iron to desolder the cable on the two PCB's (easy !)
Have Fun ;-)
Print instructions
Print the outer parts (L and R) with a Support enforcer in the hole.
The inner parts doen't need Supports.
if've printed it with 0.15 Layer height and Galaxy Black Prusament PLA