Ikea lack support leg support bracker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After i made the Ikea Lack enclosure for my Original Prusa i3 MK3 i noticed a lot of noise during printing (more than…
- Rating
- 4.978 / 5
- Likes
- 955
- Downloads
- 4,679
- Makes
- 87
- Views
- 20,811
- Reviews
- 91
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
After i made the Ikea Lack enclosure for my Original Prusa i3 MK3 i noticed a lot of noise during printing (more than before i had the enclosure). I identified that the problem came from the instability of the stacked lack tables.
With this support bracket properly stabilizing the tables, the noise has been reduced to almost nothing.
Another advantage of the support brackets is that the table legs won't bend as easily which makes the enclosure easier to move.
You can also use to bracket to fix in place 2 stacked tables.
You need 1 bracket per table leg and 8x 4x25mm screws per bracket.
*Update 17-04-2020: At request i made a longer version to work with https://www.prusaprinters.org/prints/16511-legs-spacer-for-ikea-lack-mmu2s-enclosure