Optimized Honeycomb Filament Shelf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An optimized utilitarian double-sided honeycomb shelf mount.
- Rating
- 5 / 5
- Likes
- 109
- Downloads
- 477
- Makes
- 3
- Views
- 2,618
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
7/10/2024 - I had one fail, so I reinforced the top rail and moved the top screw hole down.
8/25/2023 - I made These Pipe Wraps for identifying the spools on the shelf.
7/25/2023 - uploaded versions 7 and 8 with different mounting options. I used 1/2inch electrical conduit from Home Depot to mount my filament rolls. Make sure you screw it into the wall studs.
7/19/2023 - uploaded versions 5 and 6. I needed a bigger shelf mount. then I asked myself, “Self, how big could it be and still fit on a Bambu P1P?”
1/24/2023 - uploaded new models with different mounting options.
1/21/2023 - uploaded un updated version. I didn't get the honeycomb insert close enough, so my first print literally snapped off. this version is properly merged.
I wanted to connect Jon Levi's shelf supports into RostsP's Honeycomb wall. But I didn't like how many of the honeycombs were completely unusable, so I started remixing it.
BUT after cutting it apart and trying to get everything to line up, I then decided to just make one from the ground up.
This shelf support has many more usable honeycombs and thinner framing, using less material. print on its side with supports under the honeycomb insert. at least 20% infill.