Kingroon Kp3S Timelapse Limit Switch Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for limit switch, to make cool timelapses in a very cheap way.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 23
- Makes
- 0
- Views
- 525
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
For the assembly you only need a limit switch, a wire, one jack 3.5mm connector, and 3 metric 2 screws. The following model is the one I have used:
The model is the 13.5mm lever
The connection diagram of the 3.5 connector to carry out the trigger is indicated in the third image.
Filament: PLA
Temperature: 210
Speed: 70mm/s
Infill: 30%
Layer Heigth: 0.2mm
ESP:
Para el montaje sólo necesitáis un pulsador final de carrera, un cable , un conector jack 3.5mm y 3 tornillos métrica 2.
A continuación os dejo el que he utilizado y para el que están centrados los agujeros
Tenéis que seleccionar el modelo: 13.5mm lever
El diagrama de conexiones que teneis que seguir para que el pulsador haga las fotos está en la 3 imagen subida
Filamento: PLA
Temperatura: 210
Velocidad: 70mm/s
Relleno: 30%
Altura de capa: 0.2mm