VR Stock Gun for Oculus/Vive - Very easy and cheap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another VR Gun stock for Onward, Pavlov, BAM, Battle Royal… Parts you will need: - One inch wooden stick or PVC tube…
- Rating
- 0 / 5
- Likes
- 42
- Downloads
- 210
- Makes
- 0
- Views
- 3,163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Another VR Gun stock for Onward, Pavlov, BAM, Battle Royal…
Parts you will need:
- One inch wooden stick or PVC tube (approx 45cm is fine, but you can adapt it to suit your preferences)
- 2 x M4x20mm screws + 2 M4 Locknuts
- 2 x M3x16mm screws + 2 M3 nuts for adapting the stock to the stick (optional as you can also use the simple adapter and glue it)
You need to print:
- 2 x Support Mount (provided)
- 2 x Screw (provided)
- 1 x any adapter (provided)
- 1 x stock (provided)
- 2 x Mount for Oculus Touch or HTC Vive (Not provided but there are plenty.)
Here is the Oculus Touch Mount I used: https://www.thingiverse.com/thing:2403797/#files. Simply mirror it on your slicer to have the right mount.
The photo shows an early prototype with a different stock that I had to adapt (From https://www.thingiverse.com/thing:2057419, all credits to Gurgelx). My stock is slightly bigger, require less support and fits a 1-inch stick.
You will need to glue the screws into the plastic nuts and to glue the Mount to the supports. I am testing so magnets for make it easier to load, I will adapt the file if my tests are positives
I can modify the files to any diameter, feel free to ask
!!! ------ Note that I can print it for you and send a full kit including screws and stick! ------ !!!
Order a full kit here :)
Credits: Gurgelx for the stock in the photo and for the Oculus touch Mount
It takes me a lot of time to design these parts from scratch. Please help me develop new parts and release them for free / pay me a beer to say thanks on http://paypal.me/supportp3x
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.300
Infill:
20%
Notes:
I used PLA, with a BRIM for the supports
Category: Video Games