Filamentbox v1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a printable filamentbox with ball bearing brackets and an optional space for desiccant.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 77
- Makes
- 0
- Views
- 1,333
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a printable filamentbox with ball bearing brackets and an optional space for desiccant.
The windows are made out of PET-foil with 0.75 mm thickness.
Box6 print it uside down for a better result.
Material:
1x screw M10x75
1x hexnut M10
2x ballbearing 6000RS
This box is designed by my good friend mstark_wbg (https://www.thingiverse.com/mstark_wbg/designs)
There is a new version 2 availible with an imprinted window and some optimizations. https://www.prusaprinters.org/prints/45401-filamentbox-v2-with-imprinted-window
Print instructions
I printed it in PETG with 0,25mm layer height. The area containing the thread should be 0,20mm due to quality.
Use Supports on needed areas (outgoing material tube etc.)
You have to change the value of the bed size and origin to get it printed on a MK3S (see attached pictures).
Bed is sized to x:250 and y:217 where the origin is x:0 and y:5
Box3_Bracket needs to be printed in 0,20mm layer height and without "detect bridging perimeters". If not deselected you are not able to brake the wings free.
.3mf file is added for Box1_window_drying, Box2_window, Box3_bracket (MK3S - Mosq Magnum)
Be aware that GCodes are only for Mosq Magnum on MK3S with PETG.