Wall mounted screwdriver rack for Facom sets
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.38 – €1.68 net (excluding VAT)
For file: Rack_03A-Body_0.2mm_PETG_MINI_1h38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.53 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.64 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Custom fitted holders for all the Facom screwdrivers. Easy in and out.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 81
- Makes
- 1
- Views
- 544
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
Facom sets come in 5 pieces. In my case five straight flat screwdrivers and two PZ- in three PH screwdrivers. Fun to make a rack with perfect fitting for each screwdriver individually.
The printfile Rack_3A is for the flat screwdrivers, Rack_3B for the philips screwdrivers.
Printed in PETG
If you are into FreeCAD you can easily change the fitting for any other screwdriver. There is a parameter to set the difference between the upper and lower diameter.