Apple Watch Stand "rond.a" - IKEA hack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Apple Watch Stand "rond.a" - IKEA hack
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 26
- Makes
- 0
- Views
- 574
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you want to support my work, just buy me a coffee:
paypal.me/predypavlovic
- You need the IKEA Coaster:
https://www.ikea.com/nl/en/p/ikea-365-coaster-cork-30282946/
Step 1
Prepare the IKEA coaster
Use the template to draw in the holes and contours.
Step 2
Drill the holes with a dremel.
Step 3
Put the “ronda_3” in the hole in the center.
Step 4
Mount the Magnetic Charging Cable like shown in the picture.
Step 5
Feed the cable through the opening.
Step 6
Screw “ronda_3” tight (not too tight)
Step 7
Wind the cable to the desired length.
Normally you don't need glue. However, if the ring is too loose on the base, you can fix it with a few drops of superglue.
Support my work
+++ I will do my best to maintain and improve the project with incremental upgrades, but maintenance takes time and effort. If you wish to support my work and motivate me please consider to give me a donation +++
Thank you very much for your support!
please don’t share on other platforms - use a link to this site