Silica Gel Container for Drybox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Silica Gel Container for a drybox with spots for 2 80mm fans
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 35
- Makes
- 0
- Views
- 666
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Made a silica gel container for my new dry box and decided to have fans on it to hopefully make it more efficient (don't know if the fans actually improves anything but it was a fun little build).
Print Instructions:
Only used infill on the bottom of the base to let through air. You need to use Hight Range Modifier 0-1.6mm. I found that using the settings in the image below you get small enough holes that no silica gel falls through. If you are not using fans you can do the same with the Lid but then you would probably want 5 perimeters at least.
Whats needed:
2 M3 screws (for attaching it to the drybox)
4 M3 heatset inserts (used on Base)
4 M3 12mm screws
4-8 M3 6mm screws for the fans (Optional)
Around 190g of filament
Used Eryone Petg red and silver glitter.