Pig - Version2 - PiggyBank#1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is Version 2 of four pig prints as follows: V1 : plain pig V2 : piggy bank #1 with slot only V3 : piggy bank #2…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 68
- Makes
- 0
- Views
- 425
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Public Domain
This is Version 2 of four pig prints as follows:
- V1 : plain pig
- V2 : piggy bank #1 with slot only
- V3 : piggy bank #2 with slot and bottom opening
- V4 : Matryoshka pig(s)
All versions use the same basic design, with some significant variations. Since there are so many different prints involved, with differing print requirements I thought it best to provide the prints as four separate entries.
This piggy-bank version was printed a 50% scale only, mostly as a proof of concept, but I believe it should print full size with no problems. This version has a slot only, so it has to be broken open to remove any coins (and of course the slot on the 50% scale version is too small for most coins).
The OnShape 3D CAD files for this are here:
Print instructions
Print in PLA using the 3mf file provided. Otherwise:
- infill = 5% rectilinear
- perimeters = 2
- variable layer height (optional but recommended for the chin and top of the back)
As noted in the description I printed this at 50% scale. This version prints "feet down" with no problems, but does require supports under the chin. I used a support enforcer for this. I do not recommend using "support on build plate only" as I found the supports very difficult and time consuming to remove.