Pig - Version 3 : PiggyBank#2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is Version 3 of four pig prints as follows: V1 : plain pig V2 : piggy bank #1 with slot only V3 : piggy bank #2…
- Rating
- 4.667 / 5
- Likes
- 19
- Downloads
- 246
- Makes
- 2
- Views
- 1,204
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Public Domain
This is Version 3 of four pig prints as follows:
- V1 : plain pig
- V2 : piggy bank #1 with slot only
- V3 : piggy bank #2 with slot and bottom opening
- V4 : Matryoshka pig(s)
All versions use the same basic design, with some significant variations. Since there are so many different prints involved, with differing print requirements I thought it best to provide the prints as four separate entries.
This version has a "plug" (removable feet) to allow coins to be removed without breaking it open.
This piggy-bank version was initially printed at 50% scale (yellow in the photos) as a proof of concept; of course the slot on the 50% version is too small for most coins.
A full size version (brown in the photos) printed nicely, although it took about 10 hours.
The OnShape 3D CAD files for this are here:
Print instructions
Print in PLA using the 3mf file provided. Otherwise:
- infill = 5% rectilinear
- perimeters = 3
- variable layer height (optional but recommended for the chin and top of the back)
As noted in the description I printed this at 50% scale. This version prints "feet down" with no problems, but does require supports under the chin. I used a support enforcer for this. I do not recommend using "support on build plate only" as I found the supports very difficult and time consuming to remove.