Tevo Tarantula Pro E3D V6 Hotend & 12mm Inductive Probe Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I got a free Tarantula Pro with a creality hotend which wasn't mounted and the Creality fan shroud.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 73
- Makes
- 0
- Views
- 1,364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I got a free Tarantula Pro with a creality hotend which wasn't mounted and the Creality fan shroud. I decided to adapt it to an E3D V6 for printing Nylon and CF-Nylon so I designed up this part. Mounts with two M3x18mm (or 20mm) flathead screws, and clamps with either 6-32x1/2 or 6-19 thread rolling screws which I had on hand. SHCS or button head for the clamp.
Note: MY probe is as low as it goes and its a 4mm distance probe, so if you want to use this with a 2mm probe you may wish to modify the design and lower hat mount. >4mm distance triggering probes should be fine.
Print instructions
Print with ABS, PC, or Nylon unless you will only ever print with PLA. I tried it in PLA and it softened with the nozzle at 250C. Should print with no supports with both halves of the hotend semicircle oriented upwards. 0.2mm or lower LH.