1 / 2
OmniBox Lid (long) for 80mm fan with carry handle — image 1
1 / 2

OmniBox Lid (long) for 80mm fan with carry handle

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

OmniBox long top lid for an 80mm fan with holes for the carry handle.

Rating
5 / 5
Likes
2
Downloads
13
Makes
1
Views
116
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

OmniBox long top lid for an 80mm fan with holes for the carry handle.  A friend needed one for their OmniBox build and here it is (including their images of the printed part).

Use the 80mm fan cage, optional gasket, and carry handle from the OmniBox repo.  This lid was based on and tested with the v0.9.9 repo files but should work fine with newer releases.

Designed for use with M4 screws as that is what the fan specs use (direct screw into the fan frame) and the existing cage appears to be sized for.  No reason why you can't use M3 and nylock nuts or some other creative combo to make it work.  You might be able to shove some M3 HSI into the M4 hole without making too much of a mess.

Designed to be printed with a 0.2mm layer height using a 0.4mm nozzle.  Material doesn't matter much if this will be sitting on your desk/bench where it doesn't get hot.  If it will be where it gets hot, then use ABS or ASA.

For more information about the OmniBox, please visit https://www.printables.com/model/354643-omnibox or https://jon-harper.github.io/OmniBox/ (main docs for the project).

Tags