1 / 8
Philips Avent hourglass
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple hourglass made with two used Philips Avent bottles and some water.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 371
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
You'll need:
- 2x Avent bottles (or compatibile); I have 2x 125ml but it works albo with bigger version.
- 2x Avent teats.
Of course - use used ones. It's rubbish anyway...
Print:
- 1x ring.stl
- 1x wall.stl
- 2x nozzle*.stl
I have projected nozzles with 1.5mm hole; this gives about 1 minute for ~100ml of water. If you have problems with that - nozzles are easy removable (thread) so you can print version without holes and make some by yourself (with drill or soldering iron).
Prepare: you have to trim teats as in the photos.
Assembly: look on photos. It's really easy.