1 / 2
Addis Superdry Mop Nut Sponge Lock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement plastic 'nut' that you use to lock the replaceable sponge heads to the mop.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 30
- Makes
- 0
- Views
- 191
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a replacement plastic 'nut' that you use to lock the replaceable sponge heads to the mop. There are four nuts, one in each corner, and they can break easily.
Dimensions:
- Hexagonal total diameter: 32mm
- Hexagonal thickness: 5mm
- Nut Tip (the bit that locks inside the sponge head): 12mm x 16mm
- Nut tip depth: 7mm
Printer Settings:
- PLA (other filaments should be OK)
- Standard Quality (0.2mm)
- 40% infill
- Supports enabled