Rear Skirt Filtered Power Inlet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Power rocker switch moved to the either left/right front side skirt of the Voron 2.4
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 56
- Makes
- 0
- Views
- 623
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Power rocker switch moved to the either left/right front side skirt of the Voron 2.4
This is a mod of the rear AB skirt for a Voron 2.4
Compatible with a 300 build size Voron 2.4.
# Bill Of Materials
- 1x FN9260B-10-06 - Power Inlet with Filter (Distrelec Article Number: 301-09-731 / Manufacturer Part Number: FN9260B-10-06)
- 1x RND 170-00002 - Fuse 5 x 20mm, 10A, 250V (Distrelec Article Number: 300-43-422 / Manufacturer Part Number: RND 170-00002)(fuse is not included with the outlet)
- 5x M3 Heat-set insert
- 2x M3x8 SHCS
- 2x M3x6 BHCS (SHCS will also work)
# Instructions
- Print the skirt for the side you want to mount the filtered power inlet on.
- put the power inlet inn to the hole and fasten it with two M3x6 screws.
- insert the fuse into the power outlet.
- Remove the stock skirt piece from your Voron 2.4 and install the new one in it's place.
#Print settings (Recommended by Voron team)
- Infill: 40%
- Wall count: 4
- Solid top/bottom layers : 5
# Inlet info
- Rating: 10 A, 250 VAC
- Contact Configuration: 2NO
- Panel Cut Out Width: 33.3mm
- Panel Cut Out Height: 29.3mm
- Mounting Type: Screw
This is a mod of the skirt that was designed by the Voron team : https://github.com/VoronDesign/Voron-2